GWELEC Makita 18V 5200mah BL1852B Makita Compatible 18v BL1860b BL1830 BL1840 BL1850 BL1830b BL1840b BL1850b BL1860b Compatible Battery Level Display

[Makita 18V] Makita 18v BL1852 Voltage: 18v Capacity: 5200mAh (actual capacity 5.2Ah) 94watts Type: Lithium-ion battery (Li-ion). The applicable product has an actual capacity of 5200mah. There are products on the market that are labeled as 6000mah, but the actual capacity is up to 4000mah! Tests and comparisons are welcome. [Indicator] Press the confirmation button to see the remaining amount. In the unlikely event that there is a malfunction, two scale lamps will flash alternately to notify you of the malfunction. The speed and power of work differ depending on the power tool, so there may be errors depending on the actual situation. [Equipped with excellent cells] [Equipped with excellent cells, and the control board is equipped with a protection circuit that controls charging! It supports overcurrent protection, overcharge prevention, overdischarge prevention, etc. Compatible with the high-performance Makita 18v, which is much more economical and stress-relieving than replacing a high-quality model all the time. [Widely used] Makita 18v BL1852 Compatible models: BL1860B, BL1850, BL1840, BL1830, BL1830B, BL1820B, BL1815, BL1815N, etc. This BL1852 compatible has a super high capacity of 5.2Ah, so you don't need to charge it frequently. [Low defective rate] The product has obtained PSE and CE marks.It is a high quality Makita compatible product that has been thoroughly inspected by professional inspection machines. Achieving a low defect rate. It will be thoroughly inspected by professional inspection equipment before shipping. [Product specifications] Product name: Makita 18v compatible Rechargeable battery type: Lithium ion battery (Li-ion) Capacity: 6000mAh / 6ah Function: Overcurrent protection, overcharge prevention, overdischarge prevention Use when you feel that the power of the tool is getting weaker Please stop and charge the battery. Do not charge a fully charged Makita again. Please charge within the range of 10℃ to 40℃. If the Makita compatible 18V becomes hot after use, we recommend that you plug it in to cool it down and charge it. If you are not using a lithium-ion Makita compatible battery for a long period of time (6 months or more), we recommend that you charge it before storing it. High functionality and high quality: Because there is little self-discharge, it is possible to work close to a fully charged battery even after long-term storage. In the event of high temperature, over-discharge, or overload, it will automatically shut off the electricity to protect your Makita. We can do it because we are confident in our quality. Equipped with a protection circuit *Overcurrent protection function *Overcharge prevention function *Overdischarge prevention function The protection circuit protects the Makita internal cells from being damaged. Focus on quality control! High performance: Large capacity and powerful output Durability: Uses cells made by major manufacturers , long-lasting and strong About charging the compatible Makita vacuum cleaner To remove the compatible Makita vacuum cleaner, press the button on the side of the Makita 18v compatible vacuum cleaner and pull it out. Plug the charger into a 100V power source. The Makita compatible tool charge indicator light will return a blinking "green" light. When inserting, be careful of + and - and insert along the insertion guide until it hits the bottom. When you insert the Makita compatible battery, the charging indicator light will turn red and charging will begin. When the charging is completed, the charging indicator light will turn green and the electronic buzzer will beep for about 5 seconds. If you just plug in the Makita, it will trickle charge for 24 hours. Warning Do not charge Makita with anything other than the dedicated charger. If you use a charger for another Makita, there is a risk of fire, overheating, explosion, or fluid leakage. Do not touch the Makita compatible terminals with metal, etc. Be sure to attach the battery cover to the battery after disconnecting it from the product or charger. Please do not use anything other than Makita-specific products. Also, remodeled Do not use Makita 18-compatible batteries (including Makita 18V models that have been disassembled and internal parts such as cells replaced). Do not pierce the Makita compatible product with nails, subject it to impact, or disassemble or modify it. There is a risk of heat generation, fire, or explosion. When charging Makita compatible tools continuously, charging time may take longer. Do not charge, use, or store Makita in high-temperature locations such as near fire or under the blazing sun. Do not store the Makita compatible in places where the ambient temperature may rise above 50°C (such as in a metal box or inside a car in summer). This may cause deterioration, resulting in smoke or fire. Suggestion: Does not support fast charging. Please do not charge when no one is around.