Coolbe: Informácie o výrobku poskytuje predajca. Bez ohľadu na uvedené informácie nemá výrobok žiadne preventívne, diagnostické, liečebné ani rehabilitačné vlastnosti, nie je to liek a nemal by byť používaný k akýmkoľvek liečebným účelom. Pred použitím sa poraďte s lekárom.
-----
NOTIFICATIONS:
1. When in use, when the power button is pressed, the “WARM UP” digital display appears and the screen counts down (1-15 seconds). Then the “BLOW” digital display will appear and the screen will count down (1-9 seconds). When the digital display reads “00”, start the blow test.
2. Blow for no less than 10 seconds until the measurement is accurately displayed on the LCD screen.
Portable Breathalyzer Professional Breath Alcohol Tester LCD Display Detector for Drunk Driving Car Electronics Alcohol Test
Specifications:
Model: T05 alcohol tester.
Sensor type: semiconductor sensor
Display: LCD display (black and white)
Test range: 0.00-0.19%BAC (0-1.9g/l)
Measurement unit: mg/l (BrAC) mg/ml (BAC)
Shell material: PC plastic
Measurement Mode: Rapid Examination, Automatic Detection
Measurement time: 20 seconds
Power supply: Built-in rechargeable lithium polymer battery
Battery: 3.7V 200MAH, can be continuously measured 150 times.
Power adapter requirements: DC5V 1A
Working temperature: 0-45℃
Warm-up time: 10 seconds
Blowing time: within 10 seconds, more than 4 seconds required
Reaction time: less than 5 seconds
Working current: 250MA (max)
Standby current: less than 20UA
Product Size: 100MM*28MM*16MM
Product net/gross weight: 24.4g/52.g
Product Size: 28*15.3*96.7mm
Package Size: 11.4* 6.4*1.8cm
Package includes:
1 x Portable alcohol tester
Only the above package content, other products are not included.
Note:
1. Conduct the test after drinking for at least 20 minutes, as it takes about 20 minutes for alcohol to be absorbed from the digestive system into the bloodstream. immediately after drinking, the test results can only reflect the current oral alcohol concentration,not the alcohol concentration in the bloodstream.
2. To ensure accurate test results, please wait for 20 minutes after drinking alcohol before conducting the test. lt is best to wait at least 3 minutes from the last test time.
3. Do not directly use chemicals or corrosive solvents to test the product, and avoid liquid flowing into the blowing tube.
4. When there is a high concentration of gas present, this machine cannot function properly
5.lf tested under low battery conditions, there is a certain deviation between the test value and the actual value.
6. lt is strictly prohibited to place and use in a closed environment with corrosive or air pollution such as pigments, pesticides, alcohol, etc.
7.Unauthorized repair and damage to internal parts can lead to product malfunction.
8. Prevent this machine from falling from a height or being subjected to severe vibrations.
