Coolbe: Informasjon om varen er oppgitt av selgeren. Uavhengig av denne informasjonen har varen ingen forebyggende, diagnostiske, terapeutiske, rehabiliteringsegenskaper, er ikke et legemiddel, skal ikke brukes til medisinske formål og er ikke et medisinsk produkt. Ta kontakt med en spesialist.
-----
CURING LIGHT LED B TYPE
This light-curing machine with adjustable working hours, working time visual, curing effciency higher characteristic. This light-curing machine equipped with charging status recognized by charging stands ( charging: the indicator light; charging end: led BAA; left: LED shining host ) This light-curing machine at work, every 5 seconds buzzer "di" tone, while at the same time shows the time remaining on th display; non-work time, 120 seconds without any key is pressed, the light-curing machineautomatically shu down to conserve battery power; shut down state, press any key to boot.
FEATURES
1. Selection of high power LED, light intensity is high, long service life;
2.Cold light source, less heat and a long time of use;
3.Beautiful and has excellent heat transfer;
4.A variety of work mode options: light, mode ; Gradually light mode; Pulse mode
5.Automatic shutdown, low-power alarm;
6. Display tube using digital work time, clarity, and time can be in controlled in 5-40s;
7.Sleep screensavers function, saving power
8. Automatic memory function-automatic saves last job when the function and the number of the seconds.
FUNCTION KEYS
ON/OFF button：
(1) Turn on or turn off the LED blue-ray output
(2) Can make the machine run
TIME button ：
(1) You can set the working time (10s, 20s, 30s, 40s)
(2) Can make the machine run
USING TIPS
When light curing a resin composite restoration, dentists are recommended to:
1. Position the light tip as close as possible and parallel to the restoration, when using curing light.
2. The use of orange filters are needed, for protect the dentist from eye damage during curing; to prevent the tooth from overheating.
3. When the light intensity of the machine becomes weak, you can charge it to improve performance.
Specifcation
Light Source:5W LED blue light
Light Wavelength:420nm-480nm
Light Intensity:1200-2000mw/cm2
Suitable Temperature:5C-50℃
Relative Humidity:≤80%
Solidify Time and Deepth:5S/3MM
Lnput Voltage:110V-240VAC,50-60Hz
Output Voltage:DC 4.2V
