【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
Slim body with industry's smallest tilt of approximately 10.5° *As of January 2021, according to Makita research. Excellent corner striking performance reduces cam-out. Comfortable to work near walls. Recommended for work close to the floor. Bit runout industry's smallest "zero shake". Double ball bearings are used in the bearing section. Significantly reduces runout when using long bits. It also has both durability.
New one-touch bit sleeve. Just push the sleeve in lightly without pulling it. Assists with more tasks ``Easy 4 modes'' You can select the most suitable mode according to your work. ① Wood mode ② Bolt mode ③ Thick plate texture mode ④ Thin plate texture mode + striking mode in 4 stages. Switch between fastest/strong/medium/weak with the "battle button". Suitable for everything from tightening that prioritizes power and speed to delicate tightening of machine screws, etc.
Hand button. You can change the batting mode while holding the grip. Mode memory function. Comes with a constant lighting "light mode". Can also be used as simple lighting. DC 14.4V, sliding type Li-ion battery specification. Comes with battery and charger. Tightening capacity: Machine screws M4 to M8/Ordinary bolts M5 to M16/High strength bolts M5 to M14/Coarse thread 22 to 125mm. Maximum tightening torque: 175N・m
Rotation speed: [Revolutions/min] Fastest mode 0-3,400/Strong mode 0-3,000/Medium mode 0-2,100/Weak mode 0-1,100/Wood mode 0-1,800/Volt 1 mode 0-3,400/Tex (thin board) mode 0-2,900/Tex (thick board) mode 0-3,400. Number of blows: [times/min] Fastest mode 0 to 3,600/Strong mode 0 to 3,400/Medium mode 0 to 2,600/Weak mode 0 to 1,100/Wood mode 0 to 3,600/Volt 1 mode 0 to 3,600/Tex (thin plate) mode - Stops immediately after the start of the blow/Tex (thick plate) mode 0 to 2,600
Amount of work per charge (estimate): Approximately 730 wood screws φ4.3 x 65mm/approximately 430 pieces φ5.4 x 90mm/approximately 4,200 machine screws M8 x 16mm. Body length: length 114mm x width 81mm x height 236mm. Mass: 1.3kg (including battery)
