Hello friend.
This product includes an adapter and you don't need to purchase an extra adapter.
Charger and EU Plug Included
1 X Lii-402 Charger
1 X Micro USB Cable
1 X EU Plug
Charger and US Plug Included
1 X Lii-402 Charger
1 X Micro USB Cable
1 X US Plug
Charger and UK Plug Included
1 X Lii-402 Charger
1 X Micro USB Cable
1 X UK Plug
Key Features
Micro USB DC 5V input, four slots for independent charging.
There are 4 charging currents to choose from (500mA/700mA/1000mA/2000mA, 2000mA designated 4th slot).
LED display charging status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.2V Li-ion 3.7V Li-ion 3.85V.
Automatic identification of Li-ion and Ni-MH batteries (manual selection of Limestone and Li-ion 3.85V batteries)
0V voltage activation function, 1.65-1.85V can not be charged (but there will be active current turbulence type charging).
Overcharge and over discharge, short circuit, intelligent identification of bad battery and reverse battery detection protection.
Charging mode: constant current and constant voltage.
With standard 5V/1000mA USB automatic identification output function.
Technical Parameters
Input:
Micro USB DC 5V/2A
Output:
1.42V for NiMH
4.2V±0.05V for Li-ion
3.65±0.05V for LiFe
4.35±0.05V for Li-ion
Output current:
2000mA*1 slot
1000mA*2 slots
700mA*3 slots
500mA*4 slots
Cut-off current during constant voltage charging:
less than 100mA
External power supply standby current:
less than 15.0mA
USB output function:
- USB port output no-load voltage: 4.90-5.30V; specify the 4th slot as USB output
- Output current: 1000mA;
- no-load current: less than 1mA;
- when the load is 1000m A current, its port output voltage: 4.75-5.25V;
- stop output protection voltage: about 3.0V;
For battery:
- Li-ion/IMR:
18650
18490
18350
17670
17500
16340(RCR123)
14500
10440
- NiMH
A
AA
AAA
Size:
112*90*30mm (L/W/H)
User Manual
Description of buttons and LEDs
Button:
In the case of power-on, press and hold the selection button for 2 seconds at any time, the charging current can be selected between 500mA, 700mA, 1000mA, 2000mA.
While the battery is charging, tap the Select button to change the type of rechargeable battery.
When the battery type to be charged is selected (for example: 3.20V 3.85V), the charger will enter the charging state after 5 seconds.
LED:
When the charger is connected to the 5V power supply, all the LEDs of the charger are fully illuminated instantly;
if the charging slot is not placed in the battery, the 500mA (LED) indicator is always on and the other lights are off.
When the battery is detected, the 4 LEDs are fully illuminated, and the 3.7 LEDs will flash.
At this point, you can tap the button to select the type of battery you need to charge.
If not selected, after 5 seconds, the charger will automatically select the battery type and charge it, and the charging indicator will flash.
During the charging process, press the button to check the type of rechargeable battery (no power indication), and the charger will return to the charging state after 5 seconds.
When the charger is not powered, insert the battery to check the power ratio (off after 5 seconds, you need to check and press again).
USB output indication:
When a USB output is detected, the battery indicator lights up and goes off after 10 seconds. Tap the button to view the battery level.
warning
1. This charger can only be used to charge cylindrical lithium-ion battery (3.7V, 3.8V), nickel-hydrogen/nickel-cadmium and lithium iron phosphate batteries;
2. Before use, please refer to the manual carefully, pay attention to the recommended charging current, do not use more than the recommended current to charge;
3. Charge with 5V USB adapter (adapter current recommendation 2A);
4. The charger may be hot when charging and discharging, be careful not to burn it;
5. When you stop using it, please unplug the power supply and remove the battery;
6. Can only be used in normal indoors.
7. The test data of this product is for reference only. Please refer to professional instrument for actual situation.
