Coolbe: La información del producto ha sido proporcionada por el vendedor. Independientemente de la información indicada, los productos no tienen propiedades preventivas, diagnósticas, terapéuticas, de rehabilitación, no son medicamentos, no se aplican con propósitos médicos y no son productos médicos. Consulte con un especialista.
-----
Joom: Product information is provided by the seller. Notwithstanding this information, this product is not intended to diagnose, cure, mitigate, treat or prevent any disease, is not a drug or medical device, and should not be used for any medical purpose. Please consult a medical professional.
Package Contents:-
1 x Blood Pressure Monitor
1 x Storage box
1 x English user manual
1 x Colour box
(Battery not included)
Product Information
Measurement Method: Oscillometric
Measurement range: 0-280mmHg
Heart rate 40-199 beats per minute
Main unit size: 78mm*65mm*28mm (L/W/H) (without wrist strap)
Display mode: LCD digital display
Memory capacity: 99 sets of memory for two persons
Voice: No voice
Features: The sphygmomanometer can be placed on the wrist strap:
You can put the sphygmomanometer in your pocket and measure your blood pressure anytime and anywhere.
HD large screen
One-touch pressure measurement
Intelligent pressure measurement
Intelligent power saving
Heart rate detection
High precision imported chip
198 group memory (99 groups for two persons)
Measurement Method
1. Tie the sphygmomanometer to your wrist as shown in the picture, pay attention to the position.
2. For more accurate measurement, please fasten the wrist strap tightly. 3.
3. Place the edge of the wrist strap 1-2 cm from the palm of your hand (one finger). 4.
4. Click the switch and keep the wrist strap at the same level as your heart without moving or talking.
Error codes indicate
Error 1: Due to rapid air leakage or weak pulse signal (please check the wristband, tie it off and retest)
Error 2: Due to noise (please do not move or talk, clear the air pressure in the cuff first)
Error 3: Abnormal blood pressure. (Please check the position of the cuff and re-measure in the standard position)
II P: Unable to pressurise or pressurising too quickly (check if the cuff is too tight or too loose, check if the airway is blocked)
HI: Display is in the low pressure zone, indicating that the pressure exceeds the limit. (Measure again in standard posture, do not move or talk)
Troubleshooting:
1. If the screen does not display when the On/Off button is pressed, verify that the batteries are new.
2. 2. If the measurement is not possible or the reading is too high, please measure again in the correct posture.
3. If the measured blood pressure is abnormally high or low, please wear the wrist strap correctly, relax it and then re-measure. Please keep quiet and do not talk during the measurement.
4. 4. If no pressure is applied after pressing the On/Off button, but there is still a reading, please turn off the sphygmomanometer before turning it on for measurement.
5. If your blood pressure is different every time you measure and the reading is too high or too low, please relax first. Because the result of each measurement keeps changing under tension, it is recommended to take a deep breath and calm down before taking the measurement.
